Keyword:
INHAOS ,
Arduino , Smart Car , UGV , BUONO UNO R3 LITE , LED, wireless uplaoding skecth.
l Introduce
SC1
is our latest smart car, its high playability and flexibility. The body
material is acrylic and the appearance is very beautiful. SC1 has two drive
motors, and a 360-degree caster, so it has strong driving force and very good
flexibility. We specifically design the CS-1407 , modular design, makes the
module connection easy to understand. SC1 has a very rich LED expansion interface,
so we can use it to indicate status or make color LED flickering effect.
SC1
is controlled by wireless remote, so we can freely drive it within the control
range, increased playability and convenience. The most important is that we add
a new function, it is code remote upgrade. For the
function, If USB2SERIAL LIGHT plug in, the LC-3000 connected to USB2SERIAL
LIGHT, then you can wireless upgraded the code of the motherboard. This greatly
increases the playability and convenience of the smart car. And it is a major
highlight of our smart car.
SC1
is programmable , it is suitable for learning and entertainment. And we will
provide the most basic code, you can according your own interesting to write a
new code for SC1.
l Features
- Motherboard remote upgrade capabilities.
- Remote control smart car , expanding the scope of the use of the car.
- Rich LED indicators.
- SPI port is rich and good scalability.
- Programmable , suitable for learning and play.
- High playability.
- Low-power and high cost-effective.
l Connection
introduce
1)
The connection of the smart car.
2)
The connection of the remote - control.
More about RC-1406 you can visit: www.inhaos.com
*Notice:
1. CS-1407 can be directly connected to the BUONO UNO R3 LITE, and it is easy to install
the remote-control.
2. We can use Dupont line to connect the
different modules.
3. For
the SC1, the remote control is not configured a LCD display.
l Structure Diagram
1.
The structure diagram for car.
2.
The structure diagram for remote - control.
l Parts List
l Arduino Source
Code
Four
code will coming with this board:
1, LE_1600.rar
This is arduino source code for LE-1600
, to development the LE-1600 , user need to install MassDuino driver, and write code in arduino , and upload
sketch via USB2SERIAL light cable, the relational link as below:
LE_1600 support package: http://www.inhaos.com/downcount.php?download_id=143
USB2SERIAL Light cable: http://www.inhaos.com/uploadfile/otherpic/DOC-BUONO-USB2SERIAL-V01-EN.pdf
2,
BUONO UNO R3 LITE.
This is arduino source code for UNO R3 LITE , the UNO is the master
controller, this code demo how the UNO R3 send commands
to the slave.
3,
RC_1406.
This is arduino code for MassDuino UNO
Lite R4, the MassDuino UNO Lite R4 is the motherboard for remote - control,
this code demo how the remote - control communicate with the smart car.
*Notice:
This section relates to the use of MassDuino, please visit:
没有评论:
发表评论